Before starting your dishwasher, Starting your dishwasher – Whirlpool 9700 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating Instructions
Continued

The drawings in this book may vary slightly
from your dishwasher model. They are designed
to show the different features of all the models
covered by this book.
NOTE: Your model may not include all the
features shown.

Before starting your dishwasher

1. Properly load the top and bottom racks, and

silvenware basket.

2. Spin the Upper and Lower Spray Arms to make

sure nothing will stop them from turning freely.

3. Add detergent. See page 19.
4. Check rinse agent dispenser. See page 20.

5. Push door firmly when closing and it will

automatically latch.

. Run hot water at sink nearest dishwasher until

it is hot. Turn it off.

START/FAVORITE

Starting your dishwasher

1. Press the CYCLE pad once to display the cycle

and options. Skip to step 4 if you want to use the
cycle and options shown on the display.

2. Press the CYCLE pad until the cycle you want is

shown on the display. The time remaining in the
cycle and “MINUTES" are shown on the
display. Each press of the CYCLE pad ad
vances the display to the next cycle.

3. Press the OPTIONS pad until the option you

want is shown on the display. Each press of the
OPTIONS pad advances the display to the next
option.