Completing, Installation, Congratulations – Whirlpool 3948875 User Manual

Page 5: Need, Assistance, Completing installation, Need assistance, Avhiridvol

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Completing
Installation

17,

• CHECK ELECTRICAL

REQUIREMENTS. BE SURE YOU HAVE
CORRECT ELECTRICAL SUPPLY AND
RECOMMENDED EARTHING METHOD.

'• Check that all parts are now

installed. If there is an extra part, go back

through steps to see which step was
skipped.

19.

Turn on water faucets and

check for leaks. Tighten couplings if there
is leaking. DO NOT OVERTIGHTEN; this
could cause damage to couplings.

Check that you have all of

your tools. Check that the shipping strap
was removed from the back of the washer

and used to secure the drain hose.

• Untape and plug power

supply cord into earthed outlet.

Read the Use and Care

Guide. Start the washer and allow it to
complete the regular cycle.

Congratulations!

You have successfully installed

your new Whirlpool washer. To get
the most efficient use from your new
washer, read your Whirlpool Use
and Care Guide.

Keep Installation Instructions
and Guide.

Need

Assistance?

Call your dealer or local authorized
service company.

When you call, you will need the washer

model number and serial number. Both
numbers are on the model/serial rating
plate located under the washer lid and
on the top of the washer.

AVhiriDvol

. C0»O«AriON

Part No. 3948875

Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022

Printed in U.S.A.