Head restraint adjustment, Safety belts, Sensing system for passenger airbag – CHEVROLET 2011 Traverse User Manual
Page 16: Head restraint, Adjustment -10, Safety belts -10 sensing system for, Passenger airbag -10, 10 in brief
![background image](/manuals/662233/16/background.png)
Black plate (10,1)
Chevrolet Traverse Owner Manual - 2011
1-10
In Brief
Press the button once for the
highest setting. With each press of
the button, the seat will change to
the next lower setting, and then to
the off setting. The lights indicate
three for the highest setting and one
for the lowest.
See Heated and Ventilated Front
Seats on page 3‑9 for more
information.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
For more information see Head
Restraints on page 3‑2 and Seat
Adjustment on page 3‑3.
Safety Belts
Refer to the following sections for
important information on how to use
safety belts properly.
.
.
How to Wear Safety Belts
Properly on page 3‑19.
.
Lap-Shoulder Belt on page 3‑25.
.
Lower Anchors and Tethers for
Children (LATCH System) on
page 3‑55.
Sensing System for
Passenger Airbag
United States
Canada and Mexico
The passenger sensing system will
turn off the right front passenger
frontal airbag under certain
conditions. The driver airbag,
seat‐mounted side impact airbags,
and roof‐rail airbags are not affected
by the passenger sensing system.