Champion Power Equipment 12003 - Manual (Page 14)

11
REV 12003-20120906
ENGLISH 12003
MaInTenanCe
The owner/operator is responsible for all periodic
maintenance . lubrication
All moving parts within the Electric Winch having
been Lubricated using high temperature lithium
grease at the factory . No internal lubrication is
required . Lubricate Cable Assembly periodically
using a light penetrating oil .
Cable assembly replacement
It is recommended that any modifications be
performed by a manufacturer’s authorized repair
facility, and that only manufacturer-supplied parts
be used .
1 . Move the clutch to the “Out” position .
2 . Extend Cable Assembly to its full length .
Note how the existing cable is connected to
the inside of the drum .
3 . Remove old Cable Assembly and attach new
one .
4 . Retract Cable Assembly onto drum being
careful not to allow kinking .
Complete all scheduled maintenance in a timely
manner . Correct any issue before operating the
winch .
Never operate a damaged or defective winch .
WarnInG
Improper maintenance will void your warranty .
WarnInG
For service or parts assistance, contact our
help line at
1-877-338-0999
noTe