Champion Power Equipment 14551 - Manual (Page 13)

Maintenance
Rev 14551-20090309 9
Maintenance
The owner/operator is responsible for all
periodic maintenance.
WARNING
Never operate a damaged or defective winch.
WARNING
Improper maintenance will void your warranty.
Complete all scheduled maintenance in a
timely manner. Correct any issue before
operating the winch.
NOTE
For service or parts assistance, contact our help
line at 1-877-338-0999.
Lubrication
All moving parts within the Electric Winch
having been Lubricated using high
temperature lithium grease at the factory.
No internal lubrication is required.
Lubricate Cable Assembly periodically using
a light penetrating oil.
Cable Assembly
Replacement
It is recommended that any modifications be
performed by a manufacturer’s authorized
repair facility, and that only manufacturer-
supplied parts be used
1. Rotate the clutch knob to the “Out”
position.
2. Extend Cable Assembly to its full length.
Note how the existing cable is connected
to the inside of the drum.
3. Remove old Cable Assembly and attach
new one.
4. Retract Cable Assembly onto drum
being careful not to allow kinking.