Carl Goldberg GBGA1081 - Manual (Page 3)

3
ITEMS NEEDED TO COMPLETE THIS AIRCRAFT
!
1 RADIO GUIDANCE SYSTEM (4 CHANNEL
MINIMUM REQUIRED WITH 4 SERVOS)
!
1 6” SERVO “Y” HARNESS
!
1 ELECTRONIC SPEED CONTROL
(ELECTRIC FLY C-20 FROM GREAT
PLANES SUGGESTED)
!
1 NIMH 8C 1100AAA BATTERY (2 OR 3 CELL
1500 MAH LI-PO BATTERY SUGGESTED)
!
4 MINI- PUSHROD CONNECTORS
!
1 CA ACCELERATOR
!
1 1 OZ. BOTTLE CA MEDIUM GLUE
!
1 1/2 OZ. BOTTLE CA THIN GLUE
!
1 5 MINUET EPOXY
!
1 1/4” FOAM RUBBER
TOOLS AND SUPPLIES FOR ASSEMBLY .
!
MODELING OR UTILITY KNIFE
!
WORK SURFACE (24" X48")
!
SMALL STANDARD & PHILLIPS SCREW-
DRIVERS
!
MASKING TAPE
!
NEEDLE NOSE PLIERS
!
24” RULER
!
FLEXIBLE STRAIGHT-EDGE
!
30-60-90° x 6" TRIANGLE
!
SOFT PENCIL
!
A FEW STRAIGHT OR "T" PINS
!
WIRE CUTTER (DYKES)
!
OPTIONAL HEAT GUN/COVERING IRON
!
ACID BRUSH
!
5 FT. LENGTH OF STRING
Caution:
Before starting, care-
fully go over all high
stress areas with an
epoxy or wood glue to
confirm all areas are
well glued.