Carl Goldberg GBGP0108 User Manual
Page 3
10. Fit the box to the cross bars with the “tray” on top. Make
certain everything is tightly pressed together and there are
no gaps. Then securely glue the assembly together.
11. Same as you assembled the drawer box, test fi t, then
glue together the parts of the drawer. After the glue has
hardened, sand the outside surfaces fl at and smooth.
12. Using the lines laser-cut around the edges of the
drawer front as a guide for alignment, glue the drawer
front to the drawer with the lines on the back. Mount the
knob to the drawer with the screw and washer.
13. Install the drawer and fi t the cradle bases to the cross
bars where desired. Adjust the spacing between the cradle
arms to fi t your model.
Questions or comments? Please contact us at:
Carl Goldberg Products Product Support
3002 N. Apollo Drive, Suite #1
Champaign IL 61822
www.carlgoldbergproducts.com
Telephone: 1-217-398-8970
Monday-Friday, 8am-5pm U.S. Central Time.
FAX: 1-217-398-7721
Please be sure to include a daytime telephone number or
return fax number so that we can contact you.