Bullet Tools 613 - Manual (Page 10)

10
WARRANTY
30 Day Satisfaction Guarantee
Bullet Tools™ is confident that you will be absolutely pleased
with the purchase of our product. If, for any reason, you are
not completely satisfied with your tool, we will refund your
purchase price at any time within 30 days of your original
purchase (receipt required). If you want to return your
product under our 30-day no risk trial offer (valid only for
purchases made in the US), please contact us at 1-800-406-
8998 or 208-772-0175 for return instructions.
BULLETPROOF WARRANTY GOLD (5 Year)
Bullet Tools™ warrants only to the original purchaser of
this product, when purchased from an authorized reseller
or distributor, that this product will be free from defects in
material and workmanship under normal use and service
for five (5) years from initial purchase. This warranty includes
all parts except the blade and cosmetic appearance (chips,
dings, scratches) caused by normal use and wear. This
warranty does not cover any damage due to accident,
misuse, abuse or negligence. Further, it is valid only if the
product is used with the cut products specified in the cut
guide. Please refer to the User Guide for details or call Bullet
Tools™ technical support. In order to recover under this
limited warranty, the purchaser must make claim to Bullet
Tools™ within 60 days of occurrence and must present
acceptable proof of original ownership (such as original
receipt, warranty card registration, on-line registration,
or other documentation Bullet Tools™ deems acceptable)
for the product. Bullet Tools™, at its option, shall repair or
replace the defective unit covered by this warranty.
Bullet Tools™ disclaims all warranties, express or implied,
including all warranties of merchantability and/or
fitness for a particular purpose. Additional rights may be
available under the laws of your state or province. Any
and all warranties, written or implied, are void with any
alterations to the product. Note: Bullet Tools™ shall not be
liable for any special, incidental or consequential damages,
including but not limited to lost revenue, lost profits,
rental or replacement equipment, downtime, damage to
property and third-party claims, arising out of any theory
of recovery, including warranty, contract, statutory or tort.
Your Magnum ™ Siding Shear cuts a wide variety of
products. Please refer to this cut guide for
recommended products and thicknesses.
Please note: Approved materials may vary
in density and hardness. If extreme pressure
is required to cut a product, it may result in
damage to your machine. Please contact Bullet
Tools before proceeding. Warranty is void if an
unapproved product damages the machine.
Magnum Siding Shear
CUT GUIDE
Maximum Thickness = 25mm or 1”
Material
Siding, Fiber Cement Board
Siding, Pressboard Lap
Siding, Vinyl
Siding, Wood
Trim, OSB
Trim, Fiber Cement
Trim, Vinyl
Shingles, Tar or Wood
Commercial Vinyl
Luxury Vinyl Tile
Parquet
Laminate Flooring
PVC Tile
Rubber Cove Base
Rubber Tile
Soft Plastic
To obtain warranty service, please
contact Bullet Tools at 1-800-406-8998
or 1-208-772-0175, for pre-authorization
and further instructions.