Buick 2006 Lucerne - Manual (Page 344)

2. Turn the jack handle clockwise to raise the jack
lift head.
{ CAUTION:
Raising your vehicle with the jack improperly
positioned can damage the vehicle and even
make the vehicle fall. To help avoid personal
injury and vehicle damage, be sure to fit the
jack lift head into the proper location before
raising the vehicle.
3. Put the jack into the flange in the frame which is
located near each wheel well. The flanges are
accessible through openings in the plastic trim at
the bottom of the vehicle. The front opening is about
8 inches (20 cm) back from the front wheel well.
The rear opening is about 3 inches (8 cm) forward
from the rear wheel well.
4. Position the jack and raise the jack head until it fits
firmly on the ridge in the vehicle’s frame nearest the
flat tire. Do not raise the vehicle yet.
5-76
2006 - Buick Lucerne Owner Manual