Securing a child restraint in a rear seat position, Securing a child restraint in a, Rear seat position – Buick 2007 LaCrosse User Manual

Page 58

If the position you are
using has a fixed
headrest and you are
using a dual tether,
route the tether around
the head restraint.

3. Push and pull the child restraint in different

directions to be sure it is secure.

Securing a Child Restraint in a
Rear Seat Position

If your child restraint has the LATCH system, see
Lower Anchors and Tethers for Children (LATCH)
on page 51.

If your child restraint does not have the LATCH
system, you will be using the lap-shoulder belt to
secure the child restraint in this position. Be sure
to follow the instructions that came with the child
restraint. Secure the child in the child restraint when
and as the instructions say.

1. Put the child restraint on the seat.

2. Pick up the latch plate, and run the lap and

shoulder portions of the vehicle’s safety belt
through or around the restraint. The child
restraint instructions will show you how.