Clock (with date display), Clock (with date display) -5, Light – Buick 2012 LaCrosse User Manual
Page 121

Black plate (5,1)
Buick LaCrosse Owner Manual - 2012
Instruments and Controls
5-5
See Backglass Antenna on
page 7‑25 and Satellite Radio
Antenna on page 7‑26 for the
location of the vehicle's antennas.
The compass system is designed to
operate for a certain number of
miles or degrees of turn before
needing a signal from the GPS
satellites. When the compass
display shows CAL, drive the
vehicle for a short distance in an
open area where it can receive a
GPS signal. The compass system
will automatically determine when
the GPS signal is restored and
provide a heading again. See
Compass Messages on page 5‑34
for more information on the
messages that may be displayed for
the compass.
Clock (With Date Display)
The infotainment system controls
are used to access the time and
date settings through the menu
system. See Operation on
page 7‑12 for information about
how to use the menu system.
Setting the Time and Date
1. Press the CONFIG button and
select Time and Date Settings,
or press
H
.
2. Select Set Time or Set Date.
3. Turn the Menu knob to adjust
the highlighted value.
4. Press SELECT to select the
next value.
5. To save the time or date and
return to the Time and Date
Settings menu, press the
/
BACK button at any time or
press SELECT after adjusting
the minutes or year.
Setting the 12/24 Hour Format
1. Press the CONFIG button and
select Time and Date Settings,
or press
H
.
2. Highlight Set Time Format.
3. Press SELECT to select the
12 hour or 24 hour display
format.
Setting the Month and Day
Format
1. Press the CONFIG button and
select Time and Date Settings,
or press
H
.
2. Highlight Set Date Format.
3. Press SELECT to select
MM/DD/YY (month/day/year) or
DD/MM/YY (day/month/year).
Setting the Auto Time Adjust
1. Press the CONFIG button and
select Time and Date Settings,
or press
H
.
2. Highlight Auto Time Adjust.
3. Press SELECT to turn Auto
Time Adjust on or off.
4. Press SELECT to select Time
Zone, and then select the
Time Zone.
5. Press SELECT to turn Daylight
Savings on or off.