Unpacking and inspection, Packing list, Precautions – Bricasti Design M10 Remote Control User Manual

Page 3: Notices

Unpacking and inspection

After unpacking the M10 save all packing materials in the event you ever need to ship the unit.
Thoroughly inspect the M10 and packing materials for any signs of damage in shipment. Report any
damage to the carrier at once.

Packing List:

Here are the contents of the M10 package as shipped. Please contact your dealer if any of these items are
missing:

• The M10 User Manual

• The M10 Remote Console

• One 10 meter serial remote cable

• One M7 serial loop thru terminator.

Not included are additional serial interconnect cables for connecting more than one M7 to the M10.
Contents of this kit are for connecting one M7 to one M10. See wiring and installation instructions for
further information about making one, or contact your dealer for ordering the Bricasti part.

Bricasti Part number for the optional serial interconnect cable is:

M7-SC

Precautions

The Bricasti Design M10 is a rugged device with extensive electrical protection. However, reasonable
precautions applicable to any piece of audio equipment should be observed.

y Always use the correct serial cable supplied. Refer to requirements section of the manual, using an

incorrectly wired interface cable could harm the M10 or the M7.

y To prevent fire or shock hazard, do not expose the M10 to rain or moisture.

Notices

In the interest of continued product development, Bricasti Design reserves the right to make improvements
in this manual and the product it describes at anytime and without notice.