Chauvet Q-WASH 260-LED - Manual (Page 13)

Operation
Q-Wash 260-LED User Manual Rev. 05 -9-
4. Operation
Control Panel
Description
Button Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value
in to the current function
Navigates upwards through the menu list and increases the numeric value
when in a function
Navigates downwards through the menu list and decreases the numeric
value when in a function
Control Options You can set the Q-Wash 260-LED start address in the 001~512 DMX range. This allows
for the control of up to 39 products in the 13-channel ADVANCED personality.
Programming Refer to the Menu Map on page 15 to learn how the menu options relate to each other.
The menu map has a Menu Level and a variable number of programming levels for each
option.
To go to an option in the Menu Level, press
To select an option or value within the current programming level press or
until it shows on the display. Press <ENTER> to accept. In this case, if there is another
programming level, you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press
In the EDIT menu, and will only change the value of the current
option. To change to the next option, press .
DMX Operation 1. Select DMX operation.
a) Go to MENU > INTRO > RUN.
b) Select DMX512.
2. Select a DMX mode.
a) Go to MENU > INTRO > CHANNELS.
b) Select BASIC or ADVANCED.
3. Select the starting address.
a) Go to MENU > INTRO > ADDRESS.
b) Select a starting address, 001~500 (Advanced) or 001~504 (Basic).
The highest possible starting address for each DMX mode is as follows:
DMX Mode DMX Address
Basic 504
Advanced 500
Stand-alone
Operation
1. Go to MENU > INTRO > RUN.
2. Select a stand-alone operation mode (AUTO 1, AUTO 2, CUSTOM, or
TEST).
Of all the stand-alone operation modes indicated above, only “CUSTOM” is editable
(see Edit Custom).