Christie Digital Systems M Series - Manual (Page 9)

DS+6K-M DS+10K-M roadster S+10K-M HD6K-M HD10K-M roadster HD10K-M
Image brightness Dual lamp: 5000 ANSI lumens
(5500 center lumens)
Single lamp: 2500 ANSI lumens
(2750 center lumens)
Dual lamp: 9300 ANSI lumens (10,230 center lumens)
Single lamp: 4650 ANSI lumens (5115 center lumens)
Dual lamp: 5100 ANSI lumens
(5560 center lumens)
Single lamp: 2550 ANSI lumens
(2805 center lumens)
Dual lamp: 9500 ANSI lumens (10,450 center lumens)
Single lamp: 4750 ANSI lumens (5225 center lumens)
contrast 2500-10,000:1 (full on/off) 650:1 ANSI (typical)
Display type 3-chip 0.95" DMD
native resolution SX+ (1400 x 1050) hD (1920 x 1080)
lamp type Dual Osram 200W P-vIP Dual Osram 350W P-vIP Dual Osram 200W P-vIP Dual Osram 350W P-vIP
life high power: 2000 hrs @ 200W
Low power: 3000 hrs @ 150W
high power: 1500 hrs @ 350W
Low power: 2000 hrs @ 300W
high power: 2000 hrs @ 200W
Low power: 3000 hrs @ 150W
high power: 1500 hrs @ 350W
Low power: 2000 hrs @ 300W
Input signals hDTv formats vGA through to QXGA (2048 x 1536) • Accepts all current hDTv/DTv formats • Multi-standard video decoder • horizontal and vertical scaling, all inputs
pixel clock 165 Mhz
scan rates horizontal: 15 to 120 khz • vertical: 23.97 to 150 hz
Inputs, control and networking RS232 in/out • RS422 In • Ethernet (10/100) • USB Device • GPIO (RS232 9 Pin male connector) • Built-in backlit LCD keypad • Remote control (with optional wired XLR connection)
Optical system Dust sealed, 3-chip DMD light engine • Motorized horizontal and vertical lens offset • Scheimpflug (tilt) adjustment • Built-in light shutter • Tool-free lens insertion system
lenses fixed 0.73:1 SX+/0.67:1 hD* • 1.2:1 SX+/1.1:1 hD
zoom 1.25-1.6:1 SX+/1.16-1.49:1 hD • 1.5-2.0:1 SX+/1.4-1.8:1 hD • 2.0-2.8:1 SX+/1.8-2.6:1 hD • 2.8-4.5:1 SX+/2.6-4.1:1 hD • 4.5-7.5:1 SX+/4.1-6.9:1 hD • 7.5-11.2:1 SX+/6.9-10.4:1 hD
offsets ±100% vertical • ±50% horizontal • (* ±23%v / ±13%h) ±120% vertical • ±42% horizontal • (* ±35%v / ±12%h)
Accessories standard Input cards – analog, dual link DvI • User manual
• IR remote • Line cord
Input cards – analog, dual link DvI,
dual SD/hD-SDI, video decoder •
Stacking frame • User manual •
IR remote • Line cord
Input cards – analog, dual link DVI • User manual
• IR remote • Line cord
Input cards – analog, dual link DvI,
dual SD/hD-SDI, video decoder •
Stacking frame • User manual •
IR remote • Line cord
optional Input cards – analog, dual link DvI, dual SD/hD-SDI, video decoder, twin hDMI • Coarse dust filter • Fog juice filter • Ceiling mount • Stacking frame • and more (see accessories section of brochure)
Enhanced feature sets 3 LiteLOC TM • Comprehensive Color Adjustment (CCA TM ) • Embedded Christie Twist TM image warping and edge-blending • Intelligent Lens System (ILS TM ) for zoom, focus, horizontal and vertical offset for all lenses
• Auto setup • Digital keystone correction • Dynamic iris • Menus in five languages • 99 channel memories • Multi-windowing and processing (up to a 3 x 3 array) • Motorized yellow notch filter (hD models only)
Power requirements operating voltage 110-240 vAC 50/60 hz
operating current
8.7 A @ 100 vAC 13.2 A @ 100 vAC 8.7 A @ 100 vAC 13.2 A @ 100 VAC
power 870W 1320W 870W 1320W
dissipation 2971 BTU/hr 4508 BTU/hr 2971 BTU/hr 4508 BTU/hr
Dimensions size (LxWxh): 22.1 x 19.7 x 10.2" (561 x 500 x 259mm)
shipping dimensions (LxWxh): 29 x 27 x 20.5" (737 x 689 x 521mm)
weight
55 lb (25 kg)
shipping weight 75 lb (34 kg)
Operating environment Temperature: 40 to 104° F (5 to 40° C) humidity: 10-80% non-condensing
regulatory approvals UL/CSA/IEC 60,950 (3rd edition) • FCC Class A, CE, CCC • This product conforms to all relevant European directives, standards, safety, health and environmental concerns • RohS, WEEE
limited warranty 2 years parts and labor (including light engine) • Contact an authorized Christie representative for full details of our limited warranty
1 US Patents 7,230,768; 6,205,271; 6,734,957. 2 Patent pending. 3 Some features may not be functional on initial product shipments but will be enabled via software upgrade when available.
t E C H n I C A l S P E C I F I C A t I O n S 8