Boekel Scientific 270200 Orbital Shaker - Manual (Page 6)

140 SET
40
000 ACTUAL
Hr:min:sec
RPM TIME RPM RUN:STOP
4. Operation
5 6 1 2
SET 00:28:00
S 00:01:17
S-STOP HR:MIN:SEC
3 4
RPM
TIME
4.1 Connect the
FLASK DANCER
to the AC/DC adapter.
4.2 Connect the adapter to the main power supply.
4.3 Place the flasks or plate on the platform and secure in place.
4.4 Using the buttons and (1) set the required operation time using the LCD
display (5). Note: This is optional. The unit will operate open-ended if a required operation
time is not needed.
4.5 Using the buttons and (2) set the required rotation speed using the LCD
display (6).
4.6 Press the RUN/STOP RPM button (3). The platform will start to rotate and the timer
indicator will start counting the elapsed time until the set time interval is reached, if a
set time was used.
4.7 If a set time was programmed and the set time interval is reached, the platform will stop and
the display will show the b
linking indications {STOP}. The unit will emit a beeping signal to
signal the end of the operation.
Press RUN/STOP RPM button to cancel the sound signal.
N2400303, Feb 2007, Rev. 0
Page 6
270300
Operating Instructions