BMW 2012 5 Series User Manual
Page 65
▷
External temperature above approx. +95 ℉/
+35 ℃ and the automatic climate control is
operating.
▷
The passenger compartment has not yet
been heated or cooled to the required level.
▷
The engine is not yet at operating tempera‐
ture.
▷
The wheels are at a sharp angle or the steer‐
ing wheel is being turned.
▷
After driving in reverse.
▷
Fogging of the windows when the automatic
climate control is switched on.
▷
The vehicle battery charge is very low.
▷
The engine compartment lid is unlocked.
▷
HDC is activated.
▷
The parking assistant is activated.
▷
Stop-and-go traffic.
Starting the engine
The engine starts automatically under the fol‐
lowing conditions:
▷
Manual transmission:
The clutch pedal is pressed.
▷
Automatic transmission:
By releasing the brake pedal.
When Automatic Hold is activated: press the
accelerator.
After the engine starts, accelerate as usual.
Safety mode
After the engine switches off automatically, it
will not start again automatically if any one of the
following conditions are met.
▷
The driver's safety belt is unbuckled and the
driver's door is open.
▷
The hood was unlocked.
The indicator lamps come on.
The engine can only be started via the Start/
Stop button.
Note
Even if driving away was not intended, the de‐
activated engine starts up automatically in the
following situations:
▷
Excessive warming of the passenger com‐
partment when the cooling function is
switched on.
▷
The steering wheel is turned.
▷
Automatic transmission: the transmission
position is changed from D to N, R, or M/S.
▷
Automatic transmission: the transmission
position is changed from P to N, D, R, or M/
S.
▷
Automatic transmission: the accelerator and
the brake are pressed at the same time.
▷
The vehicle begins rolling.
▷
Fogging of the windows when the automatic
climate control is switched on.
▷
The vehicle battery charge is very low.
▷
Excessive cooling of the passenger com‐
partment when the heating is switched on.
▷
Low brake vacuum pressure; this can occur,
for example, if the brake pedal is depressed
a number of times in succession.
Preventing an automatic engine stop
with automatic transmission
The concept
To make it possible to drive away very quickly,
such as at an intersection, the automatic engine
stop can be actively prevented.
Preventing an engine stop using the
brake pedal
The engine stop can be actively prevented
within one second after the vehicle comes to a
standstill.
▷
Immediately after the vehicle comes to a
standstill, briefly press the brake pedal
forcefully.
Seite 65
Driving
Controls
65
Online Edition for Part no. 01 40 2 607 879 - 09 11 490