Cary Audio Design CAD-280SA - Manual (Page 8)

! PLEASE OBSERVE THE SAFETY DIRECTIONS IN THIS MANUAL TO
AVOID POSSIBLE ELECTRICAL SHOCK OR EQUIPMENT FAILURE
DUE TO IMPROPER INSTALLATION!
Cary Audio Design
1020 Goodworth Drive
Apex, North Carolina 27539
Tel: 919-355-0010
Fax: 919-355-0013
www.caryaudio.com
[email protected]
WARNING!
MAKE NO ATTEMPT TO PUT THE CAD-280 SA IN SERVICE WITH THE
BOTTOM PLATE REMOVED. CONTACT WITH THE HIGH VOLTAGES
FOUND INSIDE THE CHASSIS CAN BE FATAL!
COMPLETELY REMOVE AC POWER PLUG FROM THE WALL AND
ALLOW 30 MINUTES FOR THE HIGH VOLTAGE CAPACITORS TO
DISCHARGE THROUGH BLEEDER RESISTORS BEFORE ATTEMPTING
TO CHANGE TUBES OR CLEAN THE INSIDE OF THE AMPLIFIER.
CAUTION
NEVER REMOVE OR INSERT AC PLUG WHEN THE UNIT IS ON OR
THE AC POWER SWITCH IS IN THE ON POSITION. OBSTRUCTION
OF THE TOP PORTION OF THE CAD-280 SA WILL RESULT IN TUBES
OVERHEATING AND DAMAGE TO THE AMPLIFIER.