BlackVue DR750LW-2CH V.2.01 - Manual (Page 40)

40
Time Setting
If an external GPS is not connected, set time manually before use.
If time is not set, the time of a recorded video may not be correctly saved.
1
Format the microSD card, and then upgrade the firmware.
2
Connect to the website of BlackVue (www.blackvue.com), and download
the time setting program.
3
Run the time setting program before setting time.
Note
y When setting time, set time when BlackVue power is on. The product
boots approximately 15 seconds after power supply.
y If an external GPS is connected, time will be automatically set.
Sensitivity Setting
It is possible to set the G-sensor sensitivity to start event recording during normal
recording and the G-sensor & motion detection sensitivity to start event recording
during recording in parking mode, respectively.
1
Click the G button and click the Sensitivity tab.
2
Change a setting, and click Save & Close .
Note
y For details about advanced sensitivity settings, refer to Advanced
Sensitivity Settings . (Page 41)