Io i installation – Audio Note IO I User Manual
Page 9
It is often easier to connect the tonearm wires to the connection pins located at the
rear of the cartridge body before it is mounted in the head-shell. The pins are colour
coded according to the International Standard Colour Code. Connect the four
tonearm wires to the corresponding cartridge pins: -
UNDER NO CIRCUMSTANCES SHOULD THE HEAD-SHELL WIRES BE
SOLDERED DIRECTLY TO THE CONNECTION PINS OF THE CARTRIDGE
BODY. HEAT APPLIED TO THE CONNECTION PINS WILL CAUSE
IRREPARABLE DAMAGE
.
IO I INSTALLATION
RIGHT
NEGATIVE
‘GREEN’
RIGHT
POSITIVE
‘RED’
LEFT
NEGATIVE
‘BLUE’
LEFT
POSITIVE
‘WHITE’