AquaCraft Mini Alligator Tours - Manual (Page 2)

2
INTRODUCTION & DESCRIPTION CHANGES
Thank you for purchasing the AquaCraft Mini Alligator Tours! We
want the time you spend with your new RC boat to be fun and
successful so please fully read the manual. If for any reason you
think this RC model is not for you, return it to your local hobby
dealer immediately. Your hobby dealer cannot accept returns on any
model after fi nal assembly or after your boat has been operated.
All pictures, descriptions, and specifi cations found in this instruction
manual are subject to change without notice. AquaCraft™ maintains
no responsibility for inadvertent errors in this manual.
FEATURES & SPECIFICATIONS
BOAT SPECIFICATIONS:
Length 18-1/4" (463mm)
Height 7-1/4" (183mm)
Width 7" (177mm)
Weight 24.6oz
POWER SYSTEM:
380 Brushed Motor
7.2V 6-cell 1100mAh NiMH Battery
12V DC Quick Charger
CONTROL SYSTEM:
2-Channel Pistol Grip Transmitter
Waterproof ESC/Receiver
Micro Steering Servo
BOAT FEATURES:
Magnetic Hatch
Twin Air Rudders
Molded Air Propeller
Tough ABS Construction
ITEMS INCLUDED
ITEMS REQUIRED
➧ Eight “AA” batteries
WARRANTY SERVICE
AquaCraft will warrant your model for 90 days after the purchase
from defects in materials or workmanship of original manufacture.
AquaCraft, at their option, will repair or replace at no charge, the
incorrectly made part. This warranty does not cover damage caused
by crash, abuse, misuse, alteration or accident. To return your boat
for service you need to provide proof of purchase. Your store receipt
or product invoice will suffi ce.
IN NO EVENT SHALL THE PURCHASER BE ENTITLED TO ANY
INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES,
WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO
USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT.
This warranty gives you specifi c legal rights and you may also
have other rights, which vary from state to state. Outside USA and
Canada, contact local importer for warranty information.
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, Illinois 61822
Phone: (217) 398-0007 9:00 am - 5:00 pm Central Time M-F
E-mail: [email protected]
SAFETY PRECAUTIONS
➧ Never, ever, attempt to swim after a stalled RC boat. DO NOT
get in the water for any reason to retrieve your boat. Your Mini
Alligator Tours has fl otation added to the interior of the hull and
the cowl. They will not sink. To aid you in retrieving a stalled RC
boat you can use a fi shing reel with a tennis ball tied to the end
of the line. Or better yet, get yourself a small Jon boat so you
can row out and pick up your boat. Remember to use a PFD any
time you enter your retrieval craft.
➧ AquaCraft products are to be used by ages 14 and over.
➧ Do not touch the propeller anytime the engine is running. Pay
equally close attention to items such as loose clothing, shirtsleeves,
ties, scarves, long hair or anything that may become entangled in
the spinning prop. If your fi ngers, hands, etc. come in contact with
the spinning propeller, you may be severely injured.
➧ The speed and mass of this boat can infl ict property damage and
severe personal injury if a collision occurs. Never run this boat
in the presence of swimmers or where the possibility of collision
with people or property exists.
➧ This boat is controlled by radio signals, which are susceptible to
possible interference from other R/C transmitters, paging systems,
or other electrical noise. Before turning your radio transmitter and
receiver on, make sure no one else in the area is operating a radio
on the same frequency (channel).
➧ If your Mini Alligator Tours should happen to lose power, water
currents will slowly carry it to shore. The bad news is that the boat
could be carried to the opposite shore. When surveying areas to
run your model, keep variables in mind such as wind direction,
size of the lake, etc. It is not advisable to run R/C boats on any
free-fl owing bodies of water such as creeks or rivers.