AOC LE24H060 - Manual (Page 21)

20
BASIC OPERATION
To operate your LED-LCD TV, you may use the TV remote control or side panel buttons to select
input source, change channels, or adjust volume.
Turning on the LED-LCD TV
Before using the LED-LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light orange.
Power On/Off
To turn the LED-LCD TV on/off:
Press POWER button on the right side of LED-LCD TV or press POWER button on your remote control
to turn on/off the TV. The power LED indicator lights blue when the LED-LCD TV is on, and lights
orange when TV is off.
Note: When there is no signal in the PC mode, the power LED indicator lights orange after a few seconds’
idleness.
Initial Setup
When the TV is initially powered on, basic settings proceed automatically and subsequently:
(Setup Wizard only appears when first turning the TV on and without channel scanning.)
2. Press ◄ or ► to select OSD language,
then press ENTER, ◄ or ► to confirm the
selection, and press ENTER once more to
go to next step. To change the selection,
press ▲ or ▼. To return to the previous
page, press MENU.
3. Select Time Zone of your location. To press
▼ to setup DST (Daylight Saving Time) and
select On or Off with ◄ or ►, according to
the time zone of your area. To press ▼ to
setup Time Format, and select 12-hour or
24-hour with ◄ or ►, then press ENTER to
continue.
1. Press the POWER button on the remote
control. The Setup Wizard window will be
display.
English