Connecting the monitor – AOC P2460PXQ User Manual
Page 13
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1
USB Device charging port
(Only P2460PXQU)
6
DP
2
USB Device Interface(Only
P2460PXQU)
7
DVI
3
USB-PC(Only P2460PXQU)
8
D-SUB
4
Power switch
9
Audio in
5
Power
10
Earphone
To protect equipment, always turn off the PC and LCD monitor before connecting.
1
Connect the power cable to the AC port on the back of the monitor.
2
Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3
Connect one end of the DVI cable to the back of the monitor and connect the other end to the computer‟s DVI
port.
4
(Optional –Requires a video card with Audio port) - Connect one end of the Audio cable to the back of the
monitor and connect the other end to the computer’s Audio port.
5
(Optional –Requires a video card with DP port) – Connect one end of the DP cable to the back of the monitor
and connect the other end to the computer’s DP port.
6
Turn on your monitor and computer.
7
Video content supporting resolution: VGA / DVI / DP.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
13