AOC E2260PWDA - Manual (Page 12)

Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1. Power
2. A udio
3. DVI
4. D -SUB
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
12
Turn off your computer before performing the procedure below.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other
end to the computer's D-Sub port.
3. (Optional – Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to
the back of the monitor and connect the other end to the computer’s DVI port.
4. Connect the audio cable to audio in port on the back of the monitor
5. Turn on your monitor and computer.
E719SDA E719SD