AOC M2470SWDA - Manual (Page 12)

Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
M2470SWD M2470SWDA
1. Power 1. Power
2. DVI 2. Audio in
3. D-Sub 3. DVI
4. D-Sub
To protect equipment, always turn off the PC and LCD monitor before connecting.
1 Connect the power cable to the AC port on the back of the monitor.
2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3 Connect one end of the DVI cable to the back of the monitor and connect the other end to the computer‟s DVI
port.
4 Connect one end of the Audio cable to the back of the monitor and connect the other end to the computer’s
Audio port.
5 Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
12