Clarity 420 - Manual (Page 12)

Feature Set-up
Setting the Area Code
1. Press CALL to enter the Area Code
selection mode. The left most digit in
the code sequence will flash. Use the
numeric keys on the key pad to enter
the desired area code.
2. Press CALL to confirm.
3. Press UP (
▲
) or DOWN (
▼
) to
advance to the next menu.
Setting Auto Talk
Default: ON
With the auto talk feature ON the telephone
will automatically connect to a call when
lifted from the cradle. With the Auto Talk
feature OFF, you must press the TALK button
to connect to an incoming call regardless of
the location of the handset.
1. Press CALL to enter the auto talk
selection mode.
2. Press the UP (
▲
) or DOWN (
▼
)
to change the mode.
3. Press call to confirm the selection.
4. Press the UP (
▲
) or DOWN (
▼
)
to go to the next menu.
Setting Caller ID On/Off
Default: ON
1. Press CALL to enter the auto talk
selection mode.
2. Press the UP (
▲
) or DOWN (
▼
)
to change the mode.
3. Press CALL to confirm the selection.
4. Press the UP (
▲
) or DOWN (
▼
)
to go to the next menu.
If the CID mode is set to off, the LCD will
display time and date and the display will
read “CID IS OFF”.
Setting Time and Date
Default Time/Date “12:00 AM 01/01”
The time-and-date stamp is automatically
updated when the first incoming Caller ID
call is received.
If the time setting is lost during a power
outage, the clock will flash when power
received again.
1. Press UP until the display reads,
“TIME/DATE”.
2. Press CALL to start changing the date.
The display shows the current time and
date on the top line, e.g. “12:05AM
12/20” with the month digits flashing.
3. Press UP (
▲
) or DOWN (
▼
) to change
the month digits.
4. Press CALL once to select. After the month
digits are set, the date digits flash.
5. Press UP (
▲
) or DOWN (
▼
) to change
the date digits.
6. Press CALL once to select. After the date
digits are set, the hour digits flash.
12