Antari M-1 - Manual (Page 6)

6
․
The machine can be held or installed at any angle. After refilling the liquid tank, screw the cap
on tightly. Failing to do so will result in leakage if the machine is placed at an angle.
Optional Remote Control Operation
There are two optional remote controls designed for the M-1 Mobile Fogger.
1. MCT-1 Timer Remote Control: This remote control is connected via an 8-meter cord. The
duration of the fog blast is set at 10 seconds. The interval is controlled by the dial on the
remote and is adjustable between 3 and 220 seconds.
2. MCR-1 Wireless Remote Control: This remote control consists of two components. The
transmitter is on a small key chain and has a range of up to 50 meters from the receiver.
The receiver connects to the side of the M-1 Mobile Fogger and can attach to the M-1’s case
via a magnetic strip. Pressing the remote control’s button once starts the M-1 fogging. A
second press stops the M-1’s fog output.
Warning: The battery must be removed and the power adaptor unplugged before connecting or
disconnecting either of the remote controls to the M-1 Mobile Fogger.
Optional Dummy Battery and Power Adaptor Set
Users can purchase the optional dummy battery and power adaptor for M-1 (item number:
DCP-12). The power adaptor can be used at AC100~240V power outlets. It can transform AC
power into DC12V and power the M-1 by the dummy battery. This allows for unlimited operation
of the fog machine. The disadvantage is that a power supply is required and the mobility of the M-1
is reduced as a result. The advantage is that the machine can fog continuously over an unlimited
period of tim
Caution
․ Always monitor tank fluid level as you are fogging. Running a fog machine with no fluid can
permanently damage the unit.
․ If you experience low output, pump noise or no output at all, remove the battery immediately.
Check fluid level and re-charge the battery. When the liquid tank is full and the battery is
charged, plug the battery in and press the button on the handle. If the machine is still not
working and you are unable to determine the cause of the problem, do not continue pushing
the remote button, as this may damage the unit. Do not open the case. There are no user
serviceable parts inside. Return the machine to an Antari dealer for service.
․ When the M-1 mobile fog machine is not in use for more than one hour, the battery must be
removed. Otherwise, the battery might be out of order.