Antari W-101 User Manual
Page 6

-4-
Safety Screw
Finger Screw
To help avoid accidental exposure to dangerous live AC mains voltage, two
safety screws are fitted that require a screw driver to remove. Once these are
removed, the finger screws can be undone by hand (see photo above).
Once the screws are removed, the lid of the housing can be carefully swung
upwards, as shown above. Take care not to spill any of the bubble fluid inside
the unit.
The fluid tank is designed to fit only one way around. Make sure you insert it
correctly, as shown above, with the lower edge facing into the machine.
OPERATION
For manual operation, set the power switch to “Manual Mode” on the back of the
machine. The internal bubble drum and fan are activated and the machine