Antari W-101 - Manual (Page 3)

-1-
User Manual
W-101 Bubble Machine
Congratulations on the purchase of your new
ANTARI W-Series bubble MACHINE.
Introduction
Thank you for choosing an Antari W-Series Bubble Machine. You now own a
rugged and powerful state-of-the-art bubble machine. Prior to use, we suggest
that you carefully read all of the instructions. By following the suggestions
found in this user manual, you can look forward to the reliable and satisfactory
performance of your Antari Bubble Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a
long and safe life for your Antari bubble machine.
CAUTION
Risk of Electric Shock. Disconnect the appliance from the electric
supply before refilling liquid, cleaning or performing maintenance on
the machine.
Pay attention to all warning labels and instructions printed on the
exterior of your Antari Bubble Machine.
Do not overfill your bubble machine. Overfilling could cause the unit to leak.
Danger of Electric Shock
Keep this device dry.
Keep the bubble machine upright.
For all models, use a 3-prong grounded electrical outlet only. Prior to use take
care to determine that the unit is installed at the rated voltage.
Turn off or unplug the machine when not in use.
The power plug needs to be clearly seen by the user when installed on the
wall.
This machine is not water-proof. If moisture, water, or fluid gets inside the
housing, immediately unplug the unit and contact a service technician or your
Antari dealer before using it again.
No user serviceable parts inside. Refer to your Antari dealer or other qualified
service personnel.