American Diagnostic Corporation (ADC) Diagnostix 3.5v - Manual (Page 10)

14. MAINTENANCE
These instruments and their accessories do not require any specific maintenance.
Should an instrument have to be examined for any specific reason whatsoever,
please return it to ADC
® .
15. ELECTROMAGNETIC COMPATIBILITY
Medical electrical equipment is subject to special precautionary measures with
regard to electromagnetic compatibility (EMC).
Portable and mobile high-frequency communication equipment can influence
medical electrical equipment. This ME device is intended for operation in an
electromagnetic environment as specified below. The user of the device should
ensure that it is operated in such an environment.
The ME device must not be used directly next to or arranged in a stack with other
devices. If the device has to be operated near to or in a stacked arrangement with other
devices, then the ME device should be monitored in order to verify that it operates as
intended in this arrangement. This ME device is intended exclusively for use by
professional medical staff. This device can cause radio interference and can disrupt the
operation of equipment nearby. Suitable remedial measures, such as for instance re-
alignment, re-arrangement of the ME device or shielding, can become necessary.
HF emissions according
to CISPR 11
Group 1
Emission
Measurements
Electromagnetic Environment
Guidelines
Guidelines and manufacturer's declaration - electromagnetic emissions
The Diagnostix TM insrument is intended for operation in an electromagnetic
environment as specified below. The customer or the user of the Diagnostix TM
instrument should ensure that it is used in such an environment.
Compliance
The Diagnostix TM instrument employs HF
energy solely for an internal function. Its
HF emission is therefore very low and it
is unlikely that neighboring electronic
devices will be affected by interference.
HF emissions according
to CISPR 11
Class B
Harmonics emissions
according to
EC61000-3-2
Not applicable
The Diagnostix TM instrument is intended
for use in all facilities, including living
quarters and such as are directly
connected to a public power supply that
also supplies buildings that are used for
residential purposes.
Voltage fluctuation /
flicker emissions
according to
IEC61000-3-3
Not applicable