Installation, Wiring instructions – American Access Systems Touch Plate Reader - 11-3500 User Manual
Page 10
Page 10 American Access Systems / Security Brands, Inc.
Installation
Wiring Instructions
The 11-3500 is provided with a connector and 10 wire leads (see figure 2). Using appropriate wire nuts or crimp on
connectors, wire the unit as per table 1 below. Be sure unused wires are insulated to avoid shorting. In addition to the
wiring below, and on following page, AN EARTH GROUND IS REQUIRED.
Wire
Color
Description
1
White
10 to 24 ac
or 10 to 24 dc
2
White
3
Yellow
Normally Open *
4
N/A
Not Used
5
Green
Common
6
N/A
Not Used
7
Red
8 VDC for SecuraRelay™
8
N/A
Not Used
9
Orange
Remote Open
10
Brown
Remote Open
* Can be reprogrammed as Normally Closed, See page 10