Parts checklist, Introduction, Before proceeding – American Access Systems Advantage DKLP - Single Gang - 19-100sg User Manual
Page 3

Page 3 American Access Systems / Security Brands, Inc.
PARTs CHECKLIsT
Enclosed with this box you should have the following items.
Qty
Description
1
Control station
2
6/32 x 1/2 Machine screws
2
6/32 x 1/2 snake Eye screws
1
Outdoor Weather Gasket
If any of the above items are missing from this box, contact American Access systems
Tools Needed For Basic Installation
• • Wire nuts or appropriate connectors
• • Wire strippers
• • Wire cutters
• • 3/8” drive ratchet with 6” extension and 7/16” socket (Post mount units only)
• • Digital or Analog multi-meter
TECHNICAL/CUsTOMER sUPPORT
1-303-799-9757 OR
INTRODUCTION
Your new DKLP unit is a high quality, commercial grade, programmable digital key control station. The unit is
designed to operate at extremely low current and therefore is perfect for solar applications or conditions which
require very little current draw. The unit incorporates a single relay with a normally open and normally closed output.
Please be sure to read and understand all instructions before proceeding with the hookup and programming
instructions.
BEFORE PROCEEDING
To take full advantage of the 24 month limited warranty, you must be registered with American Access Systems.
Please read the enclosed warranty statement, (pg 2), fill out the warranty registration card provided and send it to:
1675 West Yale Ave.
Englewood, CO 80110
phone: 303-799-9757
fax: 303-799-9756
www.securitybrandsinc.com
SECURITY
BRANDS
INC