AltiGen MAXCS 7.0 MaxMobile Quick Reference for Android Phone User Manual

Maxmobile communicator, Quick reference - for the android phone

MaxMobile Communicator

Quick Reference - for the Android Phone

Your system administrator can give you a copy of the MaxMobile Communicator
Manual, delivered as a PDF file with the MaxMobile Communicator software.

Requirements

•

A supported phone (see User Guide) running the Android operating system.

•

A 3G or Wi-Fi connection is needed for access to the call handling buttons in the

MaxMobile call screen. The Droid phone requires Wi-Fi for this.

•

Your system administrator must have properly configured your extension.

Setting up MaxMobile Communicator

Enable Wi-Fi setting and “Unknown sources”:

1. In your phone’s Settings screen, set up and connect to your Wi-Fi network.
2. In the Settings > Applications screen, check Unknown Sources.

Download, install, and launch MaxMobile Communicator:

1. Using your phone browser, go to http://m.altigen.com/Android.
2. Select the download link, then select Save. In Download History, tap the

MaxMobile entry and tap Install. When finished, tap Open.

Configure Connection Settings:

1. Menu > Login Setting. Then enter:

•

Your extension number and password.

•

Server Address—The public MAXCS IP address (see your system

administrator for this address)

•

Alternative Server Address—Enter the private MAXCS IP address (if

applicable - see system administrator)

•

Mobile Phone—Enter your phone’s number (for example, 5107778432)

•

Mobile Trunk—Enter the dialed digits needed to reach Mobile Trunks

including the dialing prefix (for example, 15105551212).

2. Save settings.

Log in –Tap Login. MaxMobile Communicator registers its extension as a mobile
extension with your company’s MAXCS system and downloads data from MAXCS.

These buttons are displayed on the main screen after login:

Calling a stored number

From Directory, Favorites, Call Log, or Voice Mail screen, tap the entry you want
to call.

Call Via Server makes the call to an outside number through the AltiGen

MAXCS system.

Call Direct makes the call directly to an outside number without going through

the MAXCS system.