Agasio M66I - Manual (Page 20)

- 20 -
MFN-E-A2
Email provider，then test according to reference. If report needs to send, please tick
report internet IP by Mail. The e-mail server and other information can be obtained
from the mail service provider. The email notifications are pictures captured by
camera when alarm is on. if no email notification is needed, there is no need to choose
this one..
3.4.11. FTP Service Settings
Above setting is equally similar to Mail Server Settings，when alarming is on it
will send pictures，please enter FTP server, FTP port, FTP user, FTP password, FTP
upload directory and FTP mode. The FTP mode has two options:
PORT and POSV.
If a quick upload picture is need , select Upload Image Now and change its interval
（second）。
3.4.12. Alarm Service Settings
As shown below, there are two modes of alarm trigger. One is motion detection,
pleas refer to below interface ， the sensitivity of motion detection can be adjusted
according to the users′ requirement, the higher the number is, the lower sensitivity
is. Another one is input alarm, when connected, it triggers alarm through alarm input
signal which connects to linkage alarm GPIO;
When triggered, there are 3 alarm modes: one is IO alarm linkage, camera
connects with linkage alarm box through GPIO, sound the siren ；the second is email
notification, send email with images captured；the last is upload pictures alarm，as the
way mentioned before FTP upload pictures alarm, Upload pictures interval（second）
keeps consistent with the mentioned upload pictures interval of Ftp service settings.
The schedule refers to arming time，as the selected time interval:
0: 00 minute per
week to 0: 45 minutes and Monday 1: 00 hour and 2: 00 hour。