Agasio M66I - Manual (Page 10)

- 10 -
MFN-E-A2
3. 3. 3. 3. IE IE IE IE Browse Browse Browse Browse to to to to IP IP IP IP Camera Camera Camera Camera
After IP camera connects to PC LAN through router, you can operate on IP
camera via PC, first please run the relative software in the CD kit
3.1. 3.1. 3.1. 3.1. Use Use Use Use Finder Finder Finder Finder
Open the disk, double click file, and double click search
bar icon will be found, double click search bar, then the following interface will
appear:
If the internet cable power connect is correct, it should show device styles, name,
and IP address in the device list, (if it dose not show, please confirm power & internet
cable connection).
For the interface, left side is the current computer configuration information;
right side is the selected device network configuration information. Default IP camera
address will be set automatically according to the LAN, manually setting is not
needed(Note:
DHCP should be opened in the router), HTTP port is 81.
Inner Inner Inner Inner Access Access Access Access refers to the LAN access address;;;; Outer Outer Outer Outer Access Access Access Access refers the WAN access