beautypg.com

Cooling system, windshield washers – Acura 2001 Integra Hatchback - Owner's Manual User Manual

Page 185

background image

Cooling System, Windshield Washers

8. Start the engine and let it run for

about 30 seconds. Then turn off
the engine.

9. Fill the radiator with coolant up to

the base of the filler neck.

10. Fill the reserve tank to the MAX

mark. Install the reserve tank cap.

11. Install the radiator cap, and

tighten it to the first stop.

12. Start the engine and let it run until

the radiator cooling fan comes on
at least twice. Then stop the
engine.

13. Remove the radiator cap. Fill the

radiator with coolant up to the
base of the filler neck.

14. Start the engine and hold it at

1,500 rpm until the radiator fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.

15. Install the radiator cap, and

tighten it fully.

16. If necessary, fill the reserve tank

to the MAX mark. Install the
reserve tank cap.

Windshield Washers

Check the level in the windshield

washer reservoir at least monthly

during normal usage. In bad weather,

when you use the washers often,
check the level every time you stop
for fuel. This reservoir supplies the
windshield and rear window washers.

Maintenance

Main Menu

Table of Contents