Indicator lights – Acura 2001 TL - Owner's Manual User Manual
Page 62
Canadian models only
This light comes on when the
washer fluid level is low. Add washer
fluid when you see this light come on
(see page
).
This indicator comes on for a few
seconds when you turn the ignition
switch ON (II). It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
This lights when you set the cruise
control. See page
for information
on operating the cruise control.
This light comes on as a reminder
that you must refuel soon.
If a brake light does not work, the
indicator comes on
when you push the brake pedal with
the ignition switch ON (II).
A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Have your brake
lights repaired right away.
Indicator Lights
Instruments and Controls
Washer Level Indicator
Immobilizer System
Indicator
Cruise Control Indicator
Low Fuel Indicator
Brake Lamp Indicator
59
BRAKE LAMP
Main Menu
Table of Contents