Acura 2001 TL - Owner's Manual - Manual (Page 245)

Remove the burned out bulb from
the socket by pushing it in and
turning counterclockwise until it
unlocks.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
new bulb is working.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the inner fender cover away
from the fender and bumper.
Put the inner fender cover in place.
Install the three holding clips.
Lock each clip in place by pushing
on the center.
Use a flat-tipped screwdriver to
remove the three holding clips
from the inner fender. 4.
5.
6.
7.
8.
9.
2.
3.
Lights
Maintenance 242
H H O O L L D D I I N N G G C C L L I I P P
Main Menu Table of Contents