CLO Systems TC105B - Manual (Page 26)

Remote Control Buttons Function Description
Up Key ( ) Tilts the TV up.
Down Key ( ) Tilts the TV down to a maximum of 13º.
STOP Stops the movement.
AUTO The factory default setting is Auto-Mode. If your TV is provided with a Digital
Optical Audio Output, and the optical cable [08] has been installed as instructed
in Section 4.0, then the Auto-Mode is functional. In Auto-Mode, the program will
automatically tilt down the TV when the TV is turned ON; and return the TV to
the upright position, when the TV is turned OFF. During operation, the UP/
DOWN/STOP buttons will override the Auto-Mode. The next time the TV is
turned ON or OFF, the program will go back to the Auto-Mode.
MANU “MANU” will turns off the Auto-Mode. The program will only operate with the
remote control buttons.
RESET Pressing the RESET KEY twice within 1 second will reset the program back to
the factory default settings, which is the Auto-Mode.
9.0. Remote control
26