CLO Systems TC105B - Manual (Page 24)

8.0. Setting the preset position
Note: The pin [04] is shipped from the factory in the “STORE” opening.
(1) Insert the pin [04] into the “P1” opening for maximum preset tilt of about 6º.
(2) Insert the pin [04] into the “P2” opening for maximum preset tilt of about 9º.
(3) Insert the pin [04] into the “STORE” opening for full 13º tilt down position, and to store the pin [04].
(4) Insert the pin [04] into the “UP” opening to hold the TV up about 5º.
24