Indicator lights – Acura 2004 TSX - Owner's Manual User Manual
Page 65

The appropriate light comes on in
this display if the trunk or any door
is not closed tightly.
All the lights in the monitor display
come on for a few seconds when you
turn the ignition switch to ON (II).
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page
). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signaling.
This indicator has three functions:
It comes on as a reminder that you
have turned off the Vehicle
Stability Assist (VSA) system.
It flashes when VSA is active (see
page
).
It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). See page
for more information on the
VSA system.
When you turn on the hazard
warning switch, both turn signal
lights blink, and all turn signals on
the outside of the car should flash.
1.
2.
3.
Indicator Lights
Instruments and Controls
Turn Signal and
Hazard Warning
Indicators
VSA Activation Indicator
Door and Trunk Open Monitor
62
Main Menu
Table of Contents