Acura 2004 TL - Owner's Manual - Manual (Page 96)

Your Acura has a memory feature
for the driver’s seat and outside
mirror positions.
Two seat and outside mirror
positions, can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
Press and release the MEMO
button on the control panel. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current positions of the driver’s
seat and outside mirrors are now
stored.
Adjust the outside mirrors for best
visibility (see page
).
Adjust the seat to a comfortable
position (see page
).
Turn the ignition switch to ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is in the ON (II)
position. You can recall a
memorized position with the
ignition switch in any position.
Store a driving position only when
the vehicle is parked.
3.
1.
2.
91
88
CONTINUED
Driving Position Memory System
Instruments and Controls
Storing a Driving Position in
Memory
93
MEMO BUTTON
MEMORY BUTTONS
Main Menu Table of Contents