Acura 2010 ZDX - Advanced Technology Guide - Manual (Page 20)

COLLISION MITIGATION BRAKING SYSTEM (CMBS)
(Advance Package)
Alerts you to the possibility of a front-end collision and helps reduce the severity of the
collision if you are unable to avoid it.
Stage 2
Provides further
warning by lightly
retracting the seatbelt
and applying light
brake force.
Stage 1
Senses a quickly
approaching object
and prompts you to
take preventive action
by flashing a “BRAKE”
warning on the MID
and emitting a series of
beeps.
Stage 3
Applies stronger brake
force and seatbelt
retraction to prepare
the driver and front
passenger for impact.
= Brake Force = Brake Force
T u r n i n g C M B S O f f / O n
CMBS Off
You hear a beep and the
CMBS indicator turns off.
CMBS OFF
CMBS On
You hear a beep, a message
appears on the MID, and the CMBS
indicator turns on.
* Depending on the circumstances, CMBS may not go through all of the alert stages before initiating the last stage.
3 S t a g e s o f C M B S *
CMBS can be turned off/on by pressing and holding the CMBS OFF button
on the dashboard.
37 36
B L I N D S P O T I N F O R M A T I O N S Y S T E M ( B S I ) ( A d v a n c e P a c k a g e )
Assists you in determining if there are vehicles in your blind spot areas.
T u r n i n g B S I O f f / O n
Lane Change Passing and Passed Conflict Merging
A radar sensor on each corner of the rear bumper alerts you to a detected
vehicle in your blind spot.
Minimum operating speed: 6-7mph
When a vehicle is detected in
your blind spot, the blind spot
indicator turns on and stays lit
until the area is clear.
OFF ON
H o w I t W o r k s
When your turn signal is on and a
vehicle is detected, the blind
spot indicator blinks until the area
is clear or the turn signal is off.
Press the BSI OFF
button on the
dashboard to
turn BSI off or on.
A message
briefly appears
on the MID
screen showing
the system status.