Acura 2011 TL - Advanced Technology Guide User Manual
Page 8
12
13
C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
10
Some examples on how to program vehicle settings.
1. Turn the vehicle on.
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS, TREBLE, etc.).
3. Set your preferred climate
control settings (fan speed,
temperature, etc.).
4. Once you turn the car off,
your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the vehicle on. Shift into
Park (P).
3. Press and hold the SET button
until you hear a beep, then
release.
2. Adjust your preferred seat and
outside mirror settings.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
Tech model shown
R E A R V I E W C A M E R A
( T e c h m o d e l )
For added convenience, the area behind your vehicle is displayed to help
you navigate while backing up.
• When you shift into Reverse, a real-time image
of the area behind your vehicle is shown in the
navigation display.
• Yellow parking guidelines appear to help you
judge distance.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of
Reverse.
H o w I t W o r k s
11
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R), you can tilt either outside door mirror down slightly to
improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror
to its original position.
• To tilt the driver’s
door mirror, move the
mirror selector switch
to the left (L) position.
• To tilt the passenger’s
side door mirror,
move the mirror
selector switch to the
right (R) position.
• To turn the feature
off, move the switch
to the middle
position.
11 TL ATG:ATG_NEW STYLE
8/5/2010
1:17 PM
Page 8