Acura 2011 TL - Advanced Technology Guide - Manual (Page 7)

2. Check the MID:
• If you have the correct remote, the driver ID that appears first on
the MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match, follow these simple instructions:
- Turn the vehicle off.
- Press the unlock button on your remote.
- Turn the vehicle on again, and check the MID. The driver ID that
appears first on the MID should now match the number on the
back of your remote.
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
1. Select “CHG SETTING.”
3. Select “AUTO DOOR
UNLOCK.”
4. Select “SHIFT TO P.”
5. Select “ALL DOORS.”
6. Once the setting has been
saved, select “EXIT.”
Five groups of settings can be programmed using the MID*: Meter Setup,
Position Setup, Keyless Access Setup (if equipped), Lighting Setup, and
Door/Window Setup.
SEL/RESET
button
Info
buttons
Press the Info button to toggle to
the “Keyless Memory Settings”
display, then press SEL/RESET to
activate the menu.
P r o g r a m m i n g t h e A u t o D o o r U n l o c k S e t t i n g
* See “Customize Settings” in your owner’s manual for other programmable settings.
K E Y L E S S M E M O R Y S E T T I N G S
Each remote (labeled 1 or 2 on the back) activates its own set of
programmable audio, climate, driving position memory, and customized
settings (MID).
1. Verify that you are using the correct remote by turning the vehicle
on.
C h e c k i n g t h e R e m o t e
9
2. Select “DOOR/WINDOW
SETUP.”
3. Once you have the correct remote, you can begin to program your
Keyless Memory settings.
Tech model shown
10 11
11 TL ATG:ATG_NEW STYLE 8/5/2010 1:17 PM Page 7