Acura 2014 RLX Hybrid - Advanced Technology Guide User Manual

Page 10

A u t o D o o r L o c k s

Program how and when the vehicle doors automatically lock and unlock.

H o w I t W o r k s

C h a n g i n g S e t t i n g s

1. Press SETTINGS. Use the

interface dial to make and

enter selections.

2. Select Vehicle Settings.
3. Select Auto Door Lock or

Auto Door Unlock.

4. Select from the options.
5. Press BACK to exit the menu.

Follow the steps below to change your door settings. Make sure you are using

the key you want to change settings for (Driver 1 or Driver 2). See your Owner’s

Manual for complete setting options.

Note: The driver’s and front passenger’s door can be opened by pulling the inner front

door handle, regardless of the setting. Changing the setting to “All Doors” is useful for

unlocking the rear doors when either inner front door handle is pulled.

D e f a u l t L o c k S e t t i n g

The doors are preset to lock

when your vehicle reaches

about 10 mph.

D e f a u l t U n l o c k S e t t i n g

All doors are set to unlock when

the driver’s door is opened.

You can also change these settings using

P r o g r a m m i n g t h e D P M S

1. Turn on the vehicle. Make sure

Park (P) is selected.

3. Press SET. You will hear a beep.

2. Adjust the seat, outside mirror,

and steering wheel to your

preferred positions.

4. Press the memory button

corresponding to the remote

(1 or 2) you are using within 5

seconds. You will hear two beeps.

Notes:

• Once set, stored positions can be recalled by pressing one of the memory buttons

(1 or 2) on the door.

• Lumbar position cannot be stored.

Driving Position Memory System (DPMS)

Store driver’s seat, outside mirror, and steering wheel positions into memory for each

corresponding keyless remote transmitter (1 or 2).

14 RLX Sport Hybrid_ATG_NEW STYLE 9/27/2013 7:36 AM Page 10