Acura 2014 RDX - Advanced Technology Guide (Base) - Manual (Page 7)

9
10 11
P r o g r a m m i n g t h e D P M S
DRIVING POSITION MEMORY SYSTEM (DPMS)
1. Turn the vehicle on. Shift into
Park (P).
3. Press SET. You will hear a beep.
2. Adjust the seat and outside
mirrors to your preferred positions.
4. Within 5 seconds, press the
memory button corresponding
to the remote (1 or 2) you are
using. You will hear two beeps.
Notes:
• Once set, stored positions can be recalled by pressing one of the
memory buttons (1 or 2) on the door.
• Lumbar positions cannot be stored.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R), either door mirror can be tilted downward to improve
your view as you parallel park. Shifting out of Reverse returns the tilted mirror to its
original position.
• To tilt the driver’s door
mirror, push the mirror
selector switch to the left
(L) position when in
Reverse.
• To tilt the passenger’s
door mirror, push the
mirror selector switch to
the right (R) position
when in Reverse.
• To turn the feature off,
push the switch to the
middle position.
Store up to two driver’s seat and mirror positions into memory for each corresponding
remote transmitter (1 or 2).
C h a n g i n g t h e D i s p l a y
D i s p l a y O p t i o n s
COLOR INFORMATION DISPLAY
Choose what to display in the upper screen.
Press DISPLAY. Rotate the
selector knob to choose and
enter your selection.
Minimum
Show a blank
screen with the
clock.
Clock
(or wallpaper)
Show the clock or
an imported
image. *
* See your Owner’s Manual for instructions on how to upload a wallpaper
image.
Audio/Phone
Show current audio
or phone call
information.
14 RDX ATG_Base_ATG_NEW STYLE 3/21/2013 10:19 AM Page 7