Acura 2015 TLX - Navigation Manual (Without Software Update) Ver. ST02 - Manual (Page 75)

uu Map u Color
74
S
y
stem Setup
Set the screen brightness separately for Day and Night modes. Press the
(Display mode) button to cycle through the display modes (Day to Night to Off).
1. Press the button.
u The Brightness bar is displayed
for a few seconds.
u Rotate to adjust the
brightness. Press .
2. Press the button again.
u Repeat the procedure to switch
the display modes.
■ Switching Display Mode Manually 1 Switching Display Mode Manually
A visual guide helps you see the difference between
Day and Night modes.
2 Day or Night Mode P. 10
Illumination Priority Operation
button 1 Selects Day, Night, or Off display mode. This
button has the highest priority and overrides all
other display control adjustments listed below.
Remember: Once you press this button, you
assume full manual control of the display mode
until the power mode is set to VEHICLE OFF
(LOCK).
Sunlight sensor (see
your Owner’s
Manual for location) 2 If the sunlight sensor detects daylight and the
headlights are turned on, the system
automatically overrides the Night display and
displays the Day display mode.
Remember: If desired, use the a
button to
override this automatic choice.