beautypg.com

Homelink, Homelink® garage opener, Homelink® buttons – Acura 2015 MDX - Owner's Guide (With Software Update) Ver. ST03 User Manual

Page 26: P. 45

background image

44 |

| 45

veHICLe CoNTroLS

veHICLe CoNTroLS

Folding Down the Second-row Seats

Separately fold down the left and right halves of the second-row seat to make room for
cargo.

1. Store the center seat belt by inserting the latch plate

into the slot on the side of the anchor buckle.

2. Retract the seat belt into the holder on the ceiling.
3. Lower the center head restraint to its lowest position.

Put the armrest back into the seat-back.

4. Pull up the seat-back angle adjustment lever.
To return the seat to its original position, pull up the seat-back to an upright position
until it is securely latched into place. Reposition the seat belts as necessary.

Folding Down the Third-row Seats

Separately fold down the left and right halves of the third-row seat to make room for
cargo.

1. Pull the handle on the seat-back. The head restraint

folds down.

2. Push the seat-back forward while pulling the handle.
To return the seat to its original position, pull up the seat-
back while pulling up the handle. Push the head restraint
up to its original position.

Lever

Handle

HomeLink® Garage opener

Program your vehicle to operate up to three remote-controlled devices around your home—
such as garage doors, lighting, or home security systems—using the buttons on the ceiling.

Training a Button

Park near the system you want to program, and follow the instructions in the flowchart
below.

Press and hold the button on the remote

and the HomeLink button at the same

time. Then, while continuing to hold the

HomeLink button, press and release the

button on the remote every 2 seconds.

Does the LED blink at a faster rate within 20 seconds?

Press and hold the

HomeLink button

again.

Training

complete

YES

NO

HomeLink indicator

flashes for 2 seconds,

then remains on.

HomeLink LED

remains on.

YES

NO

YES

NO

Position the remote transmitter

1–3 inches (3–8 cm) from the

HomeLink button you want to program.

1

Press and hold the desired HomeLink

button and the button on the remote

transmitter.

Does the HomeLink indicator (LED) blink at a faster

rate after about 10 seconds?

2

a

The remote has a rolling code. Press

the “learn” button on the

remote-controlled device (e.g., garage

door opener).

Press the programmed HomeLink

button again; the remote-controlled

device should operate.

Within 30 seconds, press and hold the

programmed HomeLink button for 2

seconds.

a

Press and hold the programmed

HomeLink button for about a second.

Does the device (garage door opener) work?

3

b

4

5

To retrain a button or erase codes, see the Owner’s Manual on the Owner Information
CD or at

owners.acura.com

(U.S.) or 

myacura.com

(Canada). If you need help, visit

www.

homelink.com

.

HomeLink indicator

HomeLink buttons