Acronova XB57 User Manual

Page 3

V1.3

Operation Manual, Xymba XB47/57

REFACE

Important Safety Instructions

For your safety, basic precautions should always be followed to reduce
risk of damage, electric shock, fire, and personal injury. This includes
the followings:

Read this manual carefully and follow all warnings and

instructions.

Operate the unit with only the proper electrical specifications as

labeled on the device. Use only 3-wire extension cords that have
3-prong grounding plugs and 3-pole grounding receptacles that
accept your device's plug. Make sure the device is connected to
a known ground.

Do not expose this unit to direct sunlight, rain, moisture, water,

flammable material, gas, dust, dirt, smoke, pollution or abrupt
humidity changes.

Place this device on a steady level surface in an air-conditioned

environment with sufficient ventilation. Do not move this device
while the power is on. Handle with care.

This device generates heat during the duplication process.

Out-of-specification or unstable power supply may cause
overheating, low productivity, increased failure rate, and damage
the device.

Use a reliable power source with a correct voltage and ample

current supply. Give this device a dedicated power outlet. Do
not share the outlet with other devices.

Please make it a habit to always unplug the power cord before

troubleshooting or performing maintenance. Always turn the
power switch to the Off position when connecting the power cord.

Do not attempt to disassemble this device or touch any of the

moving parts. Refer servicing to qualified service personnel.
Unauthorized disassembly or repair will void all warranty.

Acknowledgments

Notices: Reproduction, adaptation, or translation without prior written
permission is prohibited.

Trademarks: Acronova, Nimbie, GetTray, Xymba, DupliQ, and Apus
are the trademarks of Acronova Technology Inc. All other products,

This manual is related to the following products:

XB47