A&D Weighing FXi-09 - Manual (Page 6)

4
1-4 Battery Condition and Operation
Below is a list of the battery operation according to the combination of the power switch and AC
adapter conditions. For details, read each section on the following pages.
Operation
Power
switch AC
adapter
Description
Charging the battery OFF Connected
The CHARGER LED indicator blinks and
charging starts. After about 10 hours,
charging stops automatically and the
CHARGER LED indicator goes out.
Charge the battery after it is completely
discharged.
During the charging operation, the
battery can not be used.
Using the balance powered
by the battery
ON
Not
connected
The battery supplies power to the
balance.
The battery will supply power
continuously for 8 hours under normal
conditions.
None OFF
Not
connected
The battery is not used.
Using the balance powered
by the AC adapter
ON Connected
The AC adapter supplies power to the
balance.
The AC adapter does not charge the
battery.